The DX1 is a compact, powerful DSP based audio processing unit, ideally suited for live applications and fixed installations.

The unit has 2 inputs and 6 outputs, configurable in 5 basic modes (2x2 way, 2x3 way, 4 way, 5 way and 6 way crossover). Each input has adjustable gain and delay. Each output consists of a high and low pass filter, 5 bands of parametric equalisaton, limiter, delay (adjustable in 2.6 µs steps), gain and polarity controls.

features

Comprehensive specification as standard
Superb audio quality with full >110dB dynamic range
2 input, 6 output multi-mode format
6 x 5 band parametric EQ sections
RS232 interface for factory preset
updates via PC

applications

Ideal for live and fixed installation loudspeaker management
Provides powerful DSP based audio processing
Fully configurable as electronic crossover system

TECHNICAL SPECIFICATIONS

INPUTS	Two electronically balanced
IMPEDANCE	>10k ohms
CMRR	>65dB 50Hz - 10kHz
OUTPUTS	Six electronically balanced
SOURCE IMP	<60 ohms
MIN. LOAD	600 ohm
MAX. LEVEL	+20dBm into 600 ohm load
FREQUENCY RESP.	±0.5dB 20Hz - 20kHz
DYNAMIC RANGE	>110dB 20Hz -20kHz. Unwtd
DISTORTION	<0.02% @ 1kHz, +18dBm
MAXIMUM DELAY	650 ms. (Increment 2.6 µs)
OUTPUT GAIN	adjustable +15dB to -40dB in 0.1dB steps and mute
INPUT GAIN	Adjustable +6dB to -40dB in 0.1dB steps
PARAMETRIC EQUALISATION FILTERS FILTERS	5 Sections per output
FILTER GAIN	+15dB to -30dB in 0.1dB steps
CENTRE FREQUENCY	20Hz - 20kHz, 1/36 octave steps (368 positions)
FILTER Q / BW	0.4 to 128 / 2.5 to 0.008 (Sections switched to shelving response)
LOW FREQUENCY	20Hz - 1kHz
HIGH FREQUENCY	1kHz - 20kHz
SELF GAINS	±15dB in 0.1dB steps
HIGH AND LOWPASS FILTERS FILTERS	1 of each per output
FREQUENCY (HPF)	10Hz - 16kHz, 1/36 octave steps
FREQUENCY (LPF)	60Hz - 22kHz, 1/36 octave steps
RESPONSE	Bessel / Butterworth 12/18/24dB per octave and Linkwitz-Riley 24dB per octave
LIMITERS THRESHOLD	+22dBu to -10dBu
ATTACK TIME	0.3 to 90 milliseconds
RELEASE TIME	4, 8, 16 or 32 times the attack time
DISPLAY	2 x 20 character backlit LCD
INPUT METER	2 x 3 point, -24dB to digital clip
OUTPUT METER	6 x 3 point, -24dB to limit level
CONNECTORS INPUTS	3 pin female XLR
OUTPUTS	3 pin male XLR
EXTERNAL	9 pin DEE connector (RS232)
POWER	3 pin IEC
POWER	60 to 250V ±15% @ 50/60Hz
CONSUMPTION	<20 watts
WEIGHT	3.5kg. Net (4.8kg. Shipping)
SIZE	(W) 483mm x (H) 44mm (IU) x (D) 285mm (W) 19ins x (H) 1.75ins x (D) 11.2ins